R80.10 JHF 56

The Latest GA release for R80.10 is Take 56 and you can find all the information under sk116380.

https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk116380

Note when you apply take 56 on FWM and FWGateways Clusters

you need to install SmartConsole package

Installation in Gaia Portal - using CPUSE (Check Point Update Service Engine)

Offline installation

Note: Either get the offline package from Check Point Support, or export the package from a source Gaia machine, on which this package was already downloaded / installed (for package export instructions, refer to sk92449 - section "(4-D) "How to ..."").

• Offline installation
  Note: Either get the offline package from Check Point Support, or export the package from a source Gaia machine, on which this package was already downloaded / installed (for package export instructions, refer to sk92449 - section "(4-D) "How to ..."").
  
  1. Install the latest build of CPUSE Agent from sk92449.
  2. Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions.
  3. In the upper right corner, click on the Import Package button.
  4. In the Import Package window, click on Browse... - select the CPUSE package (either offline TGZ file, or exported TAR file) - click on Import.
  5. Above the list of all software packages, click on the Showing Recommended packages button - select All.
  6. Select the imported package Check Point R80.10 Jumbo hotfix T<number> for sk116380 - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier).
  7. Select this package and click on Install Update button on the toolbar.

1. Install the latest build of CPUSE Agent from sk92449.
2. Connect to the Gaia Portal on your Check Point machine and navigate to Upgrades (CPUSE) section - click on Status and Actions.
3. In the upper right corner, click on the Import Package button.
4. In the Import Package window, click on Browse... - select the CPUSE package (either offline TGZ file, or exported TAR file) - click on Import.
5. Above the list of all software packages, click on the Showing Recommended packages button - select All.
6. Select the imported package Check Point R80.10 Jumbo hotfix T<number> for sk116380 - click on More button on the toolbar - click on Verifier (or right-click on the package and click on Verifier).
7. Select this package and click on Install Update button on the toolbar.

The following tasks were completed.

1. Upgrade CPUSE to R80.10  take 421 on FWM
2. Apply JHF 56 on FWM and FWGateway Cluster
3. Update eval license on FWM 
4. Update Security Policy to gateway post upgrade.
5. Login to Gateway post upgrade – validate functionality.

Test results

[Expert@myFWM:0]# cpinfo -y all |grep Take

This is Check Point CPinfo Build 914000176 for GAIA

   HOTFIX_R80_10_JUMBO_HF    Take: 56

   HOTFIX_R80_10_JUMBO_HF    Take: 56

   HOTFIX_R80_10_JUMBO_HF    Take: 56

   HOTFIX_R80_10_JUMBO_HF    Take: 56

   HOTFIX_R80_10_JUMBO_HF    Take: 56

   BUNDLE_R80_10_JUMBO_HF    Take: 56

[Expert@myFWM:0]#