Gaia Command Line

SHOW COMMANDS

save config	save the current configuration
show commands	shows all commands
show allowed-client all	show allowed clients
show arp dynamic all	displays the dynamic arp entries
show arp proxy all	shows proxy arp
show arp static all	displays all the static arp entry
show as	displays autonomous system number
show assets all	display hardware information
show bgp stats	shows bgp statistics
show bgp summary	shows summary information about bgp
show vrrp stats	show vrrp statistics
show bootp stats	shows bootp/dhcp relay statistics
show bootp interface	show all bootp/dhcp relay interfaces
show bonding group	show all bonding groups
show bridging groups	show all bridging groups
show backups	shows a list of local backups
show backup status	show the status of a backup or restore operation being performed
show backup last-successful	show the latest successful backup
show backup logs	show the logs of the recent backups/restores performed
show clock	show current clock
show configuration	show configuration
show-config state	shows the state of configuration either saved or unsaved
show date	shows date
show dns primary	shows primary dns server
show dns secondary	shows secondary dns server
show extended commands	shows all extended commands
show groups	shows all user groups
show hostname	show host name
show inactivity-timeout	shows inactivity-timeout settings
show interfaces	shows all interfaces
show interfaces ethx	shows settings related to an interface “x
show interfaces	show detailed information about all interfaces
show ipv6-state	shows ipv6 status as enabled or disabled
show management interface	shows management interface configuration
show ntp active	shows ntp status as enabled or disabled
show ntp servers	shows ntp servers
show ospf database	shows ospf database information
show ospf neighbors	shows ospf neighbors information
show ospf summary	shows ospf summary information
show pbr rules	shows policy based routing rules
show pbr summary	shows policy based routing summary information
show pbr tables	show pbr tables
show route	shows routing table
show routed version	shows information about routed version
show snapshots	shows a list of local snapshots
show snmp agent-version	shows whether the version is v1/v2/v3
show snmp interfaces	shows snmp agent interface
show snmp traps receivers	shows snmp trap receivers
show time	shows local machine time
show timezone	show configured timezone
show uptime	show system uptime
show users	show configured users and their homedir, uid/gid and shell
show user <username>	shows settings related to a particular user
show version all	shows version related to os edition, kernel version, product version etc
show virtual-system all	show virtual-systems configured
show vpn tunnels	use to show the vpn tunnels
show vrrp stats	shows vrrp status
show vrrp interfaces	shows vrrp enabled interfaces

SET COMMANDS

add allowed-client host any-host / add allowed-client host <ip address>	add any host to the allowed clients list/ add allowed client by ipv4 address
add backup local	create and store a backup file in /var/cpbackups/backups/( on open servers) or /var/log/cpbackup/backups/ ( on checkpoint appliances)
add backup scp ip value path value username value	adds backup to scp server
add backup tftp ip value [ interactive ]	adds backup to tftp server
add snapshot	create snapshots which backs up everything like os configuration, checkpoint configuration, versions, patch level), including the drivers
add syslog log-remote-address <ip address> level <emerg/alert/crit/err/warning/notice/info/debug/all>	specifies syslog parameters
add user <username> uid <user-id-value> homedir	creates a user
expert	executes system shell
halt	put system to halt
history	shows command history
lock database override	overrides the config-lock settings
quit	exits out of a shell
reboot	reboots a system
restore backup local [value]	restores local backup interactively
rollback	ends the transaction mode by reverting the changes made during transaction
save config	save the current configuration
set backup restore local <filename>	restores a local backup
set core-dump <enable/disable>	enable/disable core dumps
set date yyyy-mm-dd	sets system date
set dhcp server enable	enable dhcp server
set dns primary <x.x.x.x>	sets primary dns ip address
set dns secondary <x.x.x.x>	sets secondary dns ip address
set expert-password	set or change password for entering into expert mode
set edition default <value>	set the default edition to 32-bit or 64-bit
set hostname <value>	sets system hostname
set inactivity-timeout <value>	sets the inactivity timeout
set interface ethx ipv4-address x.x.x.x mask-length 24	adds ip address to an interface
set ipv6-state on/off	sets ipv6 status as on or off
set kernel-routes on/off	sets kernel routes to on/off state
set management interface <interface name>	sets an interface as management interface
set message motd value	sets message of the day
set ntp active on/off	activates ntp on/off
set ntp server primary x.x.x.x version <1/2/3/4>	sets primary ntp server
set ntp server secondary x.x.x.x version <1/2/3/4>	sets secondary ntp server
set snapshot revert<filename>	revert the machine to the selected snapshot
set snmp agent on/off	sets the snmp agent daemon on/off
set snmp agent-version <value>	sets snmp agent version
set snmp community <value> read-only	sets snmp readonly community string
add snmp interface <interface name>	sets snmp agent interface
set snmp traps receiver <ip address> version v1 community value	specifies trap receiver
set snmp traps trap <value>	set snmp traps
set static-route x.x.x.x/24 nexthop gateway address x.x.x.x on	adds specific static route
set time <value>	sets system time
set time zone <time-zone>	sets the time zone
set vsx off	sets vsx mode on
set vsx on	sets vsx mode off
set user <username> password	sets users password
set web session-timeout <value>	sets web configuration session time-out in minutes
set web ssl-port <value>	sets the web ssl-port for the system